[Coco] Coco video out.

[Little John]

Hey, all of that was my Son's so I'll have to go have a look at it. I'll get 
right back with you. John is finally home but him and his cousins are 
spending some time together. I was so happy to see the kid :) Let me have a 
look and see if he may have mixed something up when he put them into EAGLE 
from the hand drawn ones. I think they were tested on the CoCo 1 which has 
the MC1372 on the mobo... John assumed they'd work with the CoCo 2 which has 
the 1372 in the RF can - let me check and i'll get back to you. I am sitting 
here putting together a data separator out of  flip-flops, VCO and phase 
detector (the 9216B's seem hard for me to find so i'm looking at a discrete 
solution)...
JohnT
----- Original Message ----- 
From: "Mark Ormond" <markormond at mtxsystems.com>
To: <Coco at maltedmedia.com>
Sent: Saturday, October 23, 2010 9:16 PM
Subject: [Coco] Coco video out.



> This one is for John.

>

> I tried your video out circuit tonight, twice. :)

> I used a darlington and also tried the 2 npn circuits and got nothing out 

> of my coco2b.

>

> I double checked myself using your schematics and also download the brd 

> files to triple check myself.

>

> I am drawing the 5v and ground from the empty 4464 sockets and tapping pin 

> 12 of the mc1372 located in the rf modulator.

> When the circuit is connected I lose tv out also.

>

> Anything special about this model over the older ones?

>

> Thanks,

> Later,

> dabone

>

> --

> Coco mailing list

> Coco at maltedmedia.com

> http://five.pairlist.net/mailman/listinfo/coco