[Coco] strange nitros9 boot error code, very quickly after loading the boot track I get a tb*v, error 246 not ready

gene heskett gheskett at wdtv.com
Tue Nov 23 23:06:21 EST 2010


On Tuesday, November 23, 2010 10:59:57 pm Robert Gault did opine:

> gene heskett wrote:
> > Greetings;
> > 
> > I am attempting to arrive at a boot floppy, which when backed up to
> > drive 128 in hdbdos, will do a total boot from the hard drive.
> > 
> > So I copied the test boot disk to drive 128, the default for my copy
> > of hdbdos.
> > 
> > It seemed to work, but after reading the boot track, it reverted to
> > the floppy drive.
> > 
> > So then I switched the boot-floppy-6ms module for the boot_tc3 module,
> > and now it hangs at "KREL Boot tb*v", error 246 when asked to boot
> > directly from the hard drives floppy partition 128.
> > 
> > Any clues for sale?
> 
> A standard boot disk placed on a HDBDOS "hard drive" will load from the
> hard drive but as soon as the Boot module activates, the drive0 floppy
> will be read. As you suspected, you must change the Boot module for one
> that reads the HDBDOS "hard drive".
> So, what Boot module to use? The Boot module must be able to read the
> type of hard drive in use, scsi, ide, virtual. One other crucial point.
> The data in LSN0 on the hard drive must be changed so that it points to
> the boot drive, which in your case is 128. You need the Basic utility
> LINK.BAS which modifies LSN0 on the hard drive so that DD.BT (starting
> sector of bootstrap file) points to OS9Boot on drive 128.
> 
Ok, the lights just came on I think, and this needs to be done to the /sh@ 
dd.bt?

And that figure would be the value of the 3 bytes of sh
{t2|07}/DD/NITROS9/3.2.9/BOOTLISTS:dmode /sh    

 nam=SH mgr=RBF ddr=rbsuper
 hpn=07 hpa=FF74 drv=00 stp=80 typ=81 dns=08 cyl=0023 sid=01
 vfy=01 sct=0012 t0s=0012 ilv=00 sas=08 wpc=1D ofs=BB90 rwc=

called wpc and ofs, plus the offset to the os9boot file, which in this case 
is an additional $0B for a total offset of $1DBB9B, right?

Back with a yay/nay in a bit.

> Error 246, NOT READY, is not meaningful in this context. I'd bet it
> results from the lack of OS9Boot in the OS-9 partition of the hard
> drive. That's my educated guess because you have not mentioned using
> LINK.BAS.
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco


-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
That which is not good for the swarm, neither is it good for the bee.



More information about the Coco mailing list