[Coco] Hires mouse emulation in VCC

[Bob Devries]

"Use New GUI" is NOT ticked. :(

--
Besides a mathematical inclination, an exceptionally good mastery of one's 
native tongue is the most vital asset of a competent programmer.

Edsger W.Dijkstra, 18 June 1975

----- Original Message ----- 
From: "Aaron Wolfe" <aawolfe at gmail.com>
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Sent: Thursday, January 21, 2010 11:04 AM
Subject: Re: [Coco] Hires mouse emulation in VCC


Look in Miscellaneous, "Use New UI".  The new UI is what provides the
menus, probably not checked.

On Wed, Jan 20, 2010 at 7:00 PM, Bob Devries <devries.bob at gmail.com> wrote:
> Hi Aaron,
>
> When I start a MESS emulation (Coco3 NTSC), it starts up the Coco in 
> window.
> I lose the mouse pointer, but ALT-TAB does bring that back, albeit leaving
> an @ character on the coco screen :)
>
> In Default Game Properties, Controllers Tab, the option 'Enable mouse 
> input'
> is unticked.
> In 'controller mapping' the mouse device points to the Mouse.
>
> As per Robert Gault's suggestion, Sleep when possible and Multi-threaded
> rendering are ticked.
>
> I get no menu bar in version 0.136B, but I do in Version 0.110. Is that
> correct? Did they remove the menus in this version?
>
> Regards, Bob Devries
>
> --
> Besides a mathematical inclination, an exceptionally good mastery of one's
> native tongue is the most vital asset of a competent programmer.
>
> Edsger W.Dijkstra, 18 June 1975
>
> ----- Original Message ----- From: "Aaron Wolfe" <aawolfe at gmail.com>
> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
> Sent: Thursday, January 21, 2010 10:49 AM
> Subject: Re: [Coco] Hires mouse emulation in VCC
>
>
>> Besides not being able to use mouse or exit, does the emulator run,
>> i.e. do you see a Coco?
>>
>> This sort of happens in a default configuration I think..Try ALT-Tab
>> to switch away. The mouse problem can normally be solved by telling
>> MESS not to use the mouse: if you're using MESSUI then go into
>> properties for the system and under Controllers, uncheck "Enable mouse
>> input". Also check that mouse is not selected for any of the inputs
>> on the Controller Mapping page (other than Mouse device).
>>
>> Video problems can be worked out usually on the Display page. "Run in
>> a window" and unchecking "Start out maximized" might make a
>> difference. The various Videomode settings also might give better
>> results (or worse).
>>
>> One of the best things about MESS is the huge number of options
>> available, but this can also be a problem when you aren't familiar
>> with what they do. I'd bet you can solve some or all of the issues
>> you have by tweaking things.
>>
>> Good luck, let us know how it goes and maybe we can figure out any
>> remaining issues.
>> -Aaron
>>
>>
>>
>>
>> On Wed, Jan 20, 2010 at 3:25 PM, Bob Devries <devries.bob at gmail.com>
>> wrote:
>>>
>>> Actually, it was me who can't run MESS on his laptop.
>>>
>>> I checked the settings you mentioned, Robert, but there's no difference.
>>>
>>> When I start the emulation, I lose my mouse pointer altogether, and MESS
>>> does not respond to *any* Function-keys at all. The only way to quit the
>>> emulations is the three finger slaute (CTRL-ALT-DEL).
>>>
>>> This laptop is an Acer Aspire 5315. It has an Intel Celeron 550 
>>> processor
>>> @
>>> 2GHz and 1GB memory, running WinXP SP2.
>>>
>>> --
>>> Besides a mathematical inclination, an exceptionally good mastery of
>>> one's
>>> native tongue is the most vital asset of a competent programmer.
>>>
>>> Edsger W.Dijkstra, 18 June 1975
>>>
>>> ----- Original Message ----- From: "Robert Gault"
>>> <robert.gault at worldnet.att.net>
>>> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
>>> Sent: Wednesday, January 20, 2010 9:27 PM
>>> Subject: Re: [Coco] Hires mouse emulation in VCC
>>>
>>>
>>>> Wayne Campbell wrote:
>>>>>
>>>>> I have been using MESS on my laptop because I can't get VCC to run on
>>>>> it. The biggest problem I see with MESS is lack of information on how
>>>>> to
>>>>> configure it for a given system, when you know nothing about what 
>>>>> needs
>>>>> to be set, or how.
>>>>>
>>>>> It makes my laptop run warm, and there is visible hesitation in other
>>>>> apps, no matter what they are. I have looked through the 
>>>>> documentation,
>>>>> and if you are experienced enough in all of the areas concerned to
>>>>> understand it, you can configure it. Otherwise, you cannot. It would 
>>>>> be
>>>>> nice if someone could come up with a configuration tutorial that 
>>>>> walked
>>>>> the novice through the process.
>>>>>
>>>>> Wayne
>>>>
>>>> Have you gone through the on screen Help available with MESS? There are
>>>> specific instructions that ought to help with your laptop. Look at and
>>>> try:
>>>> sleep when possible, multi-thread rendering, thread priority.
>>>> These are all adjustable and should reduce the amount of CPU time
>>>> allocated to MESS.
>>>>
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> http://five.pairlist.net/mailman/listinfo/coco
>>>
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/mailman/listinfo/coco
>>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco