[Coco] NitrOS-9 Cobbler Problems
Bob Devries
devries.bob at gmail.com
Mon Jan 4 00:15:56 EST 2010
Yes, Joel,
You can use 'ded' to access the disk this way:
ded /dx@
Where x is the drive number where your virtual disk resides. Then use the
'S' command and type 4C8 in response to the 'SECTOR =' question. 'Q' quits
back to the command line prompt after the ubiquitous 'are you sure' prompt.
--
Besides a mathematical inclination, an exceptionally good mastery of one's
native tongue is the most vital asset of a competent programmer.
Edsger W.Dijkstra, 18 June 1975
----- Original Message -----
From: "Joel Ewy" <jcewy at swbell.net>
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Sent: Monday, January 04, 2010 3:58 PM
Subject: Re: [Coco] NitrOS-9 Cobbler Problems
> Bob Devries wrote:
>> If cobbler has done its job right, then you shoul see $4F53 at the
>> beginning of sector $4C8 on a 720K disk.
>>
>> If it's not there, then cobbler failed somehow.
>>
>> Be sure that your descriptors are properly set before you use cobbler.
>>
>> I'm assuming you're using a virtual disk with HDB-DOS? Do you have the
>> DRIVE ON/OFF command set to make drive 0 the virtual drive instead of the
>> real one?
>>
>
> Thanks for the response, Bob.
> I'm using only virtual disks at this point, though I have been able to
> access the real floppy drives using the /d0 and /d1 device descriptors. I
> wouldn't think that HDB-DOS' DRIVE ON/OFF command would have any play in
> OS-9. But in any case, I'm booting OS-9 immediately on power-up, so I
> don't think that's relevant.
>
> I'm not quite sure how to check the contents of sector $4C8. Would that
> be the proper LSN if I use 'ded' on the whole disk?
>
> JCE
>
>> I'm sure there's other issues, but that's all I can think of right now.
>>
>> --
>> Besides a mathematical inclination, an exceptionally good mastery of
>> one's native tongue is the most vital asset of a competent programmer.
>>
>> Edsger W.Dijkstra, 18 June 1975
>>
>> ----- Original Message ----- From: "Joel Ewy" <jcewy at swbell.net>
>> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
>> Sent: Monday, January 04, 2010 3:08 PM
>> Subject: [Coco] NitrOS-9 Cobbler Problems
>>
>>
>>> Hey everybody,
>>>
>>> I've been working on a demonstration of using 8-bit composite (NTSC)
>>> artifact colors that I'd like to distribute as a 720K NitrOS-9 disk
>>> image file, bootable over Drivewire 3. (I may also make a version that
>>> will boot from a regular 720K floppy.) The slideshow is all ready to
>>> go, but I'm having problems making a bootable disk image.
>>>
>>> I started with a NitrOS-9 image file that, IIRC, was distributed with
>>> Drivewire. It is 'nos6809l2.dsk'. I made some other disk image files
>>> using the Toolshed tools (os9 format -ds -t80 diskname.dsk) and copied
>>> my converted image files onto them, then loaded them up into the
>>> Drivewire server. No problem.
>>>
>>> Then I made another blank image the same way, and immediately used
>>> cobbler to put an OS9Boot file on the disk. Doesn't cobbler add the
>>> proper code to the boot track? I copied a shell, merged with a few
>>> utilities, grfdrv, and sysgo. I tested it by hitting reset, and (after
>>> I got all the appropriate files copied) it seemed to boot and run the
>>> slideshow.
>>>
>>> However it doesn't boot cold. After typing 'DOS' HDB-DOS simply returns
>>> to the 'OK' prompt. So it seems as if the boot track is not being laid
>>> down. I tried 'os9gen -q=os9boot' and I tried deleting the OS9Boot file
>>> and re-running cobbler, but neither of these things made any difference.
>>> What am I forgetting?
>>>
>>> I'm almost done with this demo... So close... Need to get some other
>>> work done... :-)
>>>
>>> JCE
>>>
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/mailman/listinfo/coco
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
More information about the Coco
mailing list