[Coco] Coco RS232 program pak

[Jorge Renato Machin Ibarra]

Hi

 

To configure RS-232 you need to do some pokes to addresses 65386 and 65387. To send information you need to poke it to address 65385, to receive information, you need to do a scan routine to address 65385. At the end of the manual are some DECB examples. I don't know if there is a better way to do this in DECB.

 

Jorge Machin
 
> From: devries.bob at gmail.com
> To: coco at maltedmedia.com
> Date: Fri, 12 Feb 2010 21:56:31 +1100
> Subject: Re: [Coco] Coco RS232 program pak
> 
> Roy,
> the manual is here:
> 
> ftp://maltedmedia.com/coco/MANUALS1/TANDY_HW/PAK/RS232/SCAN1/Deluxe%20RS-232%20Manual.pdf
> 
> However, I don't think the RS-232 pak uses the port numbers under disk basic 
> the same way as, say, the printer does.
> 
> Regards, Bob Devries
> 
> --
> Besides a mathematical inclination, an exceptionally good mastery of one's 
> native tongue is the most vital asset of a competent programmer.
> 
> Edsger W.Dijkstra, 18 June 1975
> 
> ----- Original Message ----- 
> From: <RJRTTY at aol.com>
> To: <coco at maltedmedia.com>
> Sent: Friday, February 12, 2010 9:09 PM
> Subject: [Coco] Coco RS232 program pak
> 
> 
> > People,
> >
> > Does anybody here know where I can
> > get a scan of the manual for the RS232
> > program pak for the coco.
> > Alternatively what buffer number does
> > it use for I/O in DECB by default...
> >
> > Roy
> >
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco 
> 
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
 		 	   		  
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
https://signup.live.com/signup.aspx?id=60969