[Coco] FD-50X series power supplies
chadbh74 at hotmail.com
Thu Oct 29 13:59:18 EDT 2009
Well Haven't been able to determine the size of the ebay PSU board yet and
would really like to keep from having a external unit. Fortunately, lucked
up on Jameco and found this PD-2505 unit that would fit neatly in place of
the factory PSU cube and external L-board/heat sink assemblies.
I will probably go with that unit should I need it.
In fact... I still have those spare 360k drives stored up as well as a spare
FD-502 controller pack. Wonder if I could somehow get a nice case that
would work for building a whole new enclosure. All I would really need is a
good case and then find a case to pak controller cable. hmmmm
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
Behalf Of Gene Heskett
Sent: Thursday, October 29, 2009 12:40 PM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] FD-50X series power supplies
On Thursday 29 October 2009, Steven Hirsch wrote:
>On Thu, 29 Oct 2009, Gene Heskett wrote:
>> On Thursday 29 October 2009, Chad H wrote:
>>> I was just wondering if anyone has ever heard of the FD-500, 501, or 502
>>> floppy systems' power supplies ever going bad. I have a FD-502 unit and
>>> it's working properly but I just came across a possible PCB part that
>>> might substitute as a replacement for the existing one should it ever go
>>> bad. But I don't want to go buying up too many extra parts if these
>>> things are as rock solid as they seem. Seems the older my system gets
>>> though the more paranoid I get about something going wrong with it.
>>> Don't need to turn my computer room into a parts warehouse or 'radio
>>> shack' either if I can help it. (maybe too late on that one)
>> Filter capacitors are a ticking clock, usually runs faster when not
>> powered up because the capacitor 'de-forms', losing capacitance slowly.
>> Or, because they are at heart aluminum foil, and its hard to make a gas
>> tight joint in foils only microns thick, they will develop high
>> resistance connections, a defect known as poor power factor, or excessive
>> ESR (Equivalent Series Resistance). But for those, keeping them on the
>> shelf isn't great, so one should go buy fresh ones, they don't keep for
>> decades on the shelf. Any capacitor whose top is bulged up from flat, or
>> which has signs of leakage on the bottom s/b replaced forthwith, its
>> already bad.
>Can't speak for the Tandy supplies specifically, but all the external
>cases I've encountered from that era with built-in analog supplies have
>bad filter caps. It's actually amusing how well things can sometimes
>function with essentially raw AC applied :-).
Chuckle, yes, I've made that observation 2 or 3 times. :-)
>Although Gene didn't mention this specifically, it's a good idea to
>replace the usual 85-degree C caps with 105-degree units whenever
I'll second that, but 105C caps are often going to be made out of pure
unobtainium for the more remotely located users. The 85C cap is fine if a
fan that can actually pull or push external air through the case is
installed, and those can be had from old cpu coolers or pc psu's for free.
Letting the case get that warm that you need the 105C caps, is going to
shorten the drive and media life considerably. The fan is much the _cooler_
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
The NRA is offering FREE Associate memberships to anyone who wants them.
Drawing on my fine command of language, I said nothing.
Coco mailing list
Coco at maltedmedia.com
More information about the Coco