[Coco] Flexible rompak cable

[N8WQ]

Hi Roger,
That is certainly an idea about desoldering the expansion port connector 
and mounting it flush with the motherboard. Darn, I wish I still had 
access to the mini wave soldering station I used to operate at work. Oh 
well, I will have to get out the elbow grease!

Alan Jones

-- 
N8WQ - Canal Winchester, Ohio
http://exwn8jef.googlepages.com/home



Roger Taylor wrote:

> At 01:22 PM 3/29/2009, you wrote:

>> I want to either build or buy a short flexible cable that will allow 

>> me to connect my floppy controller to my CoCo rom cartridge port. I 

>> am building a new CoCo mini tower and I need to conserve as much 

>> space as possible. Basically I want to mount the floppy controller 

>> either spaced over the motherboard or just long enough to even twist 

>> one turn so I can have more mounting options. At this point in time I 

>> don't care about a multipack interface I just want my floppy 

>> controller to work. Thanks...

>>

>> Alan Jones

>

>

> In my first repack (named the CoCoTower), I desoldered the expansion 

> port connector and mounted it upright.  You'll have to do some pin 

> clipping and such but it''ll pay off in the end.  If you had an MPI 

> board, it would connect at a 90-degree angle where the cartridges face 

> inwards to the imaginary box area.  Very nice results.

>

>