[Coco] Coco3 emulator

[Joe]

I found your problem. I bet your rom image is exactly 32768 bytes. Jeffs EMU 
needs a 2 byte header to tell it where to load.
If this is the case (right click -> properties) Contact me off list 
joef6809 at gmail.com
----- Original Message ----- 
From: "Bill" <cwgordon at carolina.rr.com>
To: "'CoCoList for Color Computer Enthusiasts'" <coco at maltedmedia.com>
Sent: Monday, March 02, 2009 4:15 PM
Subject: Re: [Coco] Coco3 emulator



> Well, I did all that, and still nothing.

>

>> -----Original Message-----

>> From: coco-bounces at maltedmedia.com [mailto:coco-

>> bounces at maltedmedia.com] On Behalf Of Robert Gault

>> Sent: Monday, March 02, 2009 3:59 PM

>> To: CoCoList for Color Computer Enthusiasts

>> Subject: Re: [Coco] Coco3 emulator

>>

>> There are several versions of the Vavasour Coco3 emulator but that

>> might

>> not be the issue. To run this under WinXP, you must provide the correct

>> environment. That requires you to edit the file CONFIG.NT (should be in

>> Windows\System32).

>>

>> dos=high, umb

>> device=%SystemRoot%\system32\himem.sys

>> files=100

>>

>>

>> Create a shortcut file with the following memory settings.

>> "Auto" for all memory entries and check the box "uses HMA".

>>

>> You will probably want to have an empty file named 2Megs in the same

>> directory as the program.

>

>

> --

> Coco mailing list

> Coco at maltedmedia.com

> http://five.pairlist.net/mailman/listinfo/coco