[Coco] Reading DOS Rom

[Darren A]

On Wed, Feb 11, 2009 at 4:15 PM, Steven Hirsch wrote:


> Before I damage something, can anyone confirm that the ROM from a Tandy

> floppy controller can be safely read on an EPROM programmer?  If so, what do

> I setup for?  Is there an actual EPROM part number that uses the same pinout

> as the masked ROM?  Can I simply setup for a 2764 and offset it in the

> socket?

>


If it is an FD-502 with a 28 pin ROM then it can be read just as if it were
a 2764 EPROM.  If it is a 24 pin ROM then the EPROM programmer would need to
be configured for a 68764 or 68766 EPROM.

Darren