[Coco] DriveWire printing options

[Bruce W. Calkins]

Tandy Home Publisher worked better on the DMP-105/106.  I have samples from 
both the DMP-105/106 family and the DMP-132/132A/133 family.  The 13x 
printers were faster, but sacrificed dot spacing.  OTOH; speed of the 
printer is not the issue here.



Bruce W.


=====================================


----- Original Message ----- 
From: "Aaron Wolfe"


I reviewed the documentation for the DMP132.  Its fairly complex, but 
doable.
I think I'll need to emulate just one printer or (maybe) printer
family, hopefully there is one that will provide a good amount of
functionality to a good number of applications.



On Fri, Dec 25, 2009 at 2:40 AM, Bob Devries wrote:
> Aaron,
>
> I guess you could just choose one which was common, and emulate that.
> Something like the Tandy DMP133 for instance. I'd guess that most
> applications would provide support for that. Others may have
> different/better suggestions.
>
> I personally used a Tandy DMP202 for many years. That was a 24 pin dot
> matrix printer.
>
> Regards, Bob Devries