[Coco] Broken CC3

[Gene Heskett]

On Friday 12 September 2008, George Ramsower wrote:
>>>>> On Friday 12 September 2008, George Ramsower wrote:
>>>>>>Darn,
>>>>>>
>>>>>> My CNC coco broke.
>>>>>>
>>>>>> It starts up and displays the usual stuff. I can ?mem and it reports
>>>>>>correctly. However, when I boot OS9, it crashes.
>>>>>>
>>>>>> I appears to crash when it loads the first boot sector.
>>>>>>
>>>>>>I tried other boot disks with the same results.
>>>>>>I replaced the CPU, RAM board, reseated the GIME, polished the edge
>>>>>>connector on the disk controller, reseated the ROM in the controller
>>>>>>and
>>>>>>all gives the same results.
>>>>>>
>>>>>> Suggestions?
>>
>> Does anyone remember why we modified the circuit at IC-9 to add a 74LS02?
>>
>> I'll try another '02 there, since it's socketed.
>
> This is interesting. The added chip on a spare CC3 board is an '02 but on
>the CNC coco it's an '04 chip. Since the latter was working, I'll have to
>assume it was supposed to be an '04.
>I put another one in that socket and the CC3 is still broken.
>
Humm, the 'ls02 is a quad NOR gate, the 'ls04 is a hex inverter.  That is not 
generally interchangeable.
>
>--
>Coco mailing list
>Coco at maltedmedia.com
>http://five.pairlist.net/mailman/listinfo/coco



-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
In America, it's not how much an item costs, it's how much you save.