[Coco] COCO3 System Arrangement of modules

[Mark Marlette]

John/Chris,

Sorry for the slow response, been away hunting turkeys and doing 
spring planting.....

The example in the manual is for slot #3. The SuperIDE is not slot 
dependent. Any slot will work. I like to use slot #1. So one switch 
side is the SuperIDE boot(slot #1, this is just for the boot ROM) and 
other side is for all floppy access.

Regards,

Mark
Cloud-9

At 5/23/2008 07:51 PM, Christopher Hawks wrote:

>John T Chasteen said the following on 05/23/2008 01:39 PM:
>>Hello COCO Family
>>I would like to get your opinions about a COCO3 System arrangement
>>COCO3 with 6309 connected to an Upgraded MPI unit
>>Place the Floppy in slot #4, Cloud9 SuperIDE unit with
>>a Cloud9 configured CF unit and CFA (CF Adapter).
>>I want save files from my Cassette tapes.
>>Save files from 5.25 floppy disk.
>>Transfer files to the CF or the CFA units
>>Use the CF to boot.
>>I would like to also use my Drive Wire cable to
>>download files (disk images or files) from the internet
>>or from my _PC hard drive.
>>Do you see any bugs in this conciliation
>
>John:
>
>         The SuperIDE manual saya to put the floppy controller in 
> slot 4 and The SuperIDE in slot 3.
>
>         Set the switch on the MPI to slot 3 and power up. If you 
> select floppy access from the menu, the SuperIDE will switch to the 
> floppy controller when accessing the floppys.
>
>--
>Christopher R. Hawks
>HAWKSoft
>---------------------------------------------------------
>Let's call it an accidental feature.
>         -- Larry Wall
>
>--
>Coco mailing list
>Coco at maltedmedia.com
>http://five.pairlist.net/mailman/listinfo/coco
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.4/1473 - 
>Release Date: 5/29/2008 7:53 PM
-------------- next part --------------


No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.24.4/1473 - Release Date: 5/29/2008 7:53 PM