[Coco] Cart pcb mounting holes?

[Bob Devries]

It's rumoured I may have said:
> I have a standard rompak cart here, and I measure 23 millimeters from the 
> leading edge of the pcb (the contact fingers that go into the coco),

That measurement seems to be dependant on who makes the PCB. In any case, 
that measurement corresponds to measuring from the outer edge of the cart 
case.

--
Regards, Bob Devries, Dalby, Queensland, Australia

Isaiah 50:4 The sovereign Lord has given me
the capacity to be his spokesman,
so that I know how to help the weary.

website: http://www.home.gil.com.au/~bdevasl
my blog: http://bdevries.invigorated.org/

----- Original Message ----- 
From: "Bob Devries" <devries.bob at gmail.com>
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Sent: Tuesday, January 29, 2008 10:01 AM
Subject: Re: [Coco] Cart pcb mounting holes?


> Mark,
> I have a standard rompak cart here, and I measure 23 millimeters from the 
> leading edge of the pcb (the contact fingers that go into the coco), and 
> 45 millimeters between the mounting hole centres. The case screw hole is 
> 47.5 millimeters from the leading edge of the pcb.
>
> --
> Regards, Bob Devries, Dalby, Queensland, Australia
>
> Isaiah 50:4 The sovereign Lord has given me
> the capacity to be his spokesman,
> so that I know how to help the weary.
>
> website: http://www.home.gil.com.au/~bdevasl
> my blog: http://bdevries.invigorated.org/
>
> ----- Original Message ----- 
> From: "Mark McDougall" <msmcdoug at iinet.net.au>
> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
> Sent: Tuesday, January 29, 2008 9:35 AM
> Subject: [Coco] Cart pcb mounting holes?
>
>
>> Hi,
>>
>> Can anyone point me to the specs for the mounting holes on a coco 
>> cartridge pcb (if such a thing exists). I'm about to do a 2nd run of the 
>> coco flash 2 cartridge (with fixes) and thought that, if possible, i 
>> should get the mounting holes right this time?
>>
>> The only coco cart I own is DoD and I'm not about to break that open!
>>
>> Regards,
>>
>> -- 
>> |              Mark McDougall                | "Electrical Engineers do 
>> it
>> |  <http://members.iinet.net.au/~msmcdoug>   |   with less resistance!"
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>