[Coco] Rainbow IDE problem

[Ghislain Harvey]

Well Briza wrote a little guide to how to restore it. On your archive, it is
split in 7 dsk files. One is makz89.dsk and the other are z89pat1 to
z89pat6. Those files contain patch that use The defender to restore the
Makz89.dsk copy protected sector.
My problem is that it freeze when it try to restore the makz89 on the real
coco. My guess is that I don’t copy correctly the makz89.dsk file to a
cocodisk.
Any clue on what program you use?
Ghislain Harvey

-----Message d'origine-----
De : coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] De
la part de Bob Devries
Envoyé : January-03-08 11:46 PM
À : CoCoList for Color Computer Enthusiasts
Objet : Re: [Coco] Rainbow IDE problem

Ghislain,
Yes, that's the Briza from Downunder (as I am too :) )
Sorry, but Briza is offline until further notice. He does call me fairly 
regularly, so I'll mention this problem to him.

However, it is my understanding that the Z89 programme is heabvily copy 
protected, and so a simple .dsk file will probably not re-create a working 
disk. Maybe the DK emulator will produce such a disk, but I haven't tried 
it.

Hope that helps.

I can try to forward questions to Briza, but please don't expect instand 
answers (unless I can supply those myself).

--
Regards, Bob Devries, Dalby, Queensland, Australia

Isaiah 50:4 The sovereign Lord has given me
the capacity to be his spokesman,
so that I know how to help the weary.

website: http://www.home.gil.com.au/~bdevasl
my blog: http://bdevries.invigorated.org/

----- Original Message ----- 
From: "Ghislain Harvey" <ghislainharvey at videotron.ca>
To: "'CoCoList for Color Computer Enthusiasts'" <coco at maltedmedia.com>
Sent: Friday, January 04, 2008 2:37 PM
Subject: Re: [Coco] Rainbow IDE problem


Sorry to come to your thread for asking this but is Briza the Briza one from
coco downunder?
If so is it possible for me to contact him with email? Because I have a
problem to rebuild z89 and ironforest from the downunder. It doesn't work on
emulator and it freeze my real coco3 (formatting track 1 or 0 ) . I don't
know if its me that doesn't transfer the dsk file on real coco disk
correctly....
Anyway thanks for helping me contacting Briza.
Ghislain Harvey

-----Message d'origine-----
De : coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] De
la part de Bob Devries
Envoyé : January-03-08 11:28 PM
À : coco at maltedmedia.com
Objet : [Coco] Rainbow IDE problem

Hello, coco friends.

I was just on the phone to Briza.
He's having a problem with Rainbow IDE which I haven't been able to
duplicate. He goes through all the correct moves to assemble (build) a .asm
file to .bin, but doesn't get an output.

The READOUT file has all the correct output up to and including the starting

of CCASM (Roger's assembler), but after that it has this code:

C000_0005

and no object code is produced.

I stepped him through the whole procedure which on my installation, produced

correct results. He even uninstalled and re-installed RainbowIDE(v1.4), to
no avail. I have checked all the settings with him, and they all seem
correct.

The only setting I can't check is the Options->Paths and Folders->Assemblers

Folder.(when the button [...] is clicked beside it, nothing happens).

Can someone give me a clue as to what's going wrong?

--
Regards, Bob Devries, Dalby, Queensland, Australia

Isaiah 50:4 The sovereign Lord has given me
the capacity to be his spokesman,
so that I know how to help the weary.

website: http://www.home.gil.com.au/~bdevasl
my blog: http://bdevries.invigorated.org/


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco 


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco