[Coco] cassette crossover cableRe: Stupid Cassette Port Tricks,
goosey at virgo.sdc.org
Tue Jan 29 03:28:14 EST 2008
On Mon, Jan 28, 2008 at 09:42:34PM -0800, Mike Pepe wrote:
> Now- a cassette crossover cable is entirely possible. Due to the level
> mismatch between the in and out sides of the equation, there needs to be
> a little circuitry between the two.
Rainbow, May 1989. "Wow! One disk drive, two CoCos".
Pin 2 to Pin 2
Pin 4 to 680 ohm resistor to 470 uf cap to Pin 5
Pin 5 to 470 uf cap to 680 ohm res. to Pin 4
Also, jumper Pin 5 to Pin 2 through a 1000-ohm resistor on both sides.
YMMV, I've never actually built one of these.
Willard Goosey goosey at sdc.org
Socorro, New Mexico, USA
"I've never been to Contempt! Isn't that somewhere in New Mexico?"
More information about the Coco