[Coco] Using a Commodore 1084S with the CoCo

[theother_bob]

it looks like that monitor (the d1 and d2 variants) only have TTL inputs. The pinout on my website should work, but the colors will be limited... no gaming. I would suggest bypassing the TTL input circuitry which actually converts the digital signals to analog, and inject the analog signals downstream. Others have done this to convert a monitor to analog inputs.

Bob

----- Original Message ----
From: Diego Barizo <diegoba at adinet.com.uy>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Wednesday, December 19, 2007 9:48:47 PM
Subject: Re: [Coco] Using a Commodore 1084S with the CoCo


The one I have is a 1084S-D1 and has the 9pin  :-)

I'll give it a try in a few days.

Thanks to all


theother_bob wrote:
>
> Bob
>
> *Correction*: ISTR the 1084S does not have a db9 connector but a
 6-pin din socket, same as the CoCo joystick.
>
>
>   
>   

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco





      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ