[Coco] Multipack info

[Mark Marlette]

This is the first I have heard of this. Must be that someone used the 
reserved location for something they shouldn't have.......

Rule Number 1: Foolow the spec if there is one.....In this case there 
was......

If you find it, I would love to read it.

Thanks,

Mark

Quoting "Bruce W. Calkins" <brucecalkins at bellsouth.net>:

> Stock, it works well with the CoCo 1 and 2.
> To use it with the CoCo3 it needs a addressing modification.  Not hard, just
> a 74LS10 IIRCC with some short wires and a trace cut.  Unfortunately this
> makes it flakey with the CoCo 1 and 2.  Somewhere on-line somebody wrote up
> a modification that allowed a switch, so you could swap it back and forth.
>
> Bruce W.
>
>
>> I am getting back to using  my coco3. I have a Tandy Multi-Pack  Model
>> 26-3124 S/N 2007430.
>>
>> Will this unit work with the coco2 or coco3 without causing damage?
>>
>> Thanks
>>
>> John Chasteen
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>