[Coco] Re: Look what's on eBay / CGP-115 split gears

Gene Heskett gene.heskett at verizon.net
Thu Oct 12 20:46:06 EDT 2006


Joel Ewy wrote:
> I don't have one of these plotters, so I haven't seen this gear and this
> suggestion may not be appropriate.  But maybe one could cut two disks
> out of thin sheet metal or some other material that is fairly rigid,
> available, and easy to work.  The diameter of the reinforcing disks
> needs to be such that it doesn't interfere with the teeth of the gear. 
> Drill a hole in the centers for the shaft.  Place one on each face of
> the broken gear.  Drill 4 small holes through the entire sandwich and
> hold the whole thing together with small machine screws with nuts.  This
> presupposes that you can find appropriate hardware and that you have
> space within the plotter for the extra thickness of the gear.

This 'gear' is only 1/4" wide & about 5/16th" in diameter, so this isn't 
practical.

-- 
Cheers, Gene




More information about the Coco mailing list