[Coco] SCSI Flash memory drives

Mark Marlette mark at cloud9tech.com
Mon Oct 2 14:10:19 EDT 2006


Mike,

Maybe.  I have noticed that SCSI's spec is better followed than the IDE 
spec. Heck drives from the same vendor in master/slave setup didn't 
work together. IDE/ATA is a very loose spec.

If anyone does try this, report back and we will update the .docs

Mark


Quoting Mike Pepe <lamune at doki-doki.net>:

> Hey Mark,
>
> that's not entirely true. LVD devices are supposed (important word) 
> to be backward compatible with single-ended host controllers. Usually 
> they auto-detect the bus type or there's a jumper to force SE mode.
>
> In the case of that flash drive, it also has an 80 pin SCA connector, 
> so a 50 pin to 80 pin adapter is also in order.
>
> It should work on a CoCo assuming you can overcome those two points.
>
> -Mike
>
> Mark Marlette wrote:
>> Jim,
>>
>> Low Voltage Differential Signaling (LVDS), Ultra2 SCSI introduced LVDS.
>>
>> Not supportted on the TC^3. I'm sure you could get an adapter 
>> interface but for 8MB...... Electrically they are not the same.
>>
>> Mark
>>
>>
>>
>> Quoting Jim Hickle <jlhickle at yahoo.com>:
>>
>>> Will these SCSI Flash memory drives work with a TC^3 controller? I 
>>> don't know what "LVD" means.
>>>  
>>> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=8808641416&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1 
>>> ---------------------------------
>>> How low will we go? Check out Yahoo! Messenger’s low  PC-to-Phone 
>>> call rates.
>>>
>>> -- 
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/mailman/listinfo/coco
>>>
>>
>>
>>
>>
>
>
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>






More information about the Coco mailing list