[Coco] Capacitor question

[Neil Morrison]

It was once true that you should not undervolt electrolytics, which is what
you are going to do, but modern parts are fine with this and you will not
have a problem. Do, however, not overvolt them.

BTW, another significant factor in this is the RMS current the caps can
pass. I doubt that this will be a factor either.

Neil

----- Original Message ----- 
From: "Mannequin*" <mannslists at invigorated.org>


> Hi all,
>
> I'm in the process of replacing 2 capacitor on a Color Computer 3
motherboard. I
> have a question about the replacement caps I bought. The two caps I'm
replacing
> are 25v 220uf. The replacement caps that I bought are 35v 220uf. I just
noticed
> this. :(
>
> On the boxes of the two replacement caps, it basically says that I can't
go over
> 35v, but would I be able to use them to replace the two 25v caps? Or do I
have
> to have 25v max?