[Coco] Re: Coco on a SVGA monitor using the Xrgb-2 Plus

[Theodore Evans (Alex)]

On Sep 11, 2004, at 12:00 PM, Robert Emery wrote:


> I can't imagine why it wouldn't... I've heard of amiga monitors

> being used with the CoCo3, just mave to modify the sync I believe.


Before it quit working I used an Amiga 1080 monitor with my CoCo 3.  I 
hacked a little circuit into my CoCo three and sent the appropriate 
signal out through the unused pin on the CoCo 3 video connector.  That 
with a custom cable leading to the DB9 connector for the 1080 was all 
that was necessary.  The signal levels are the same as are the scan 
frequencies.


>> I have an external one on an A1200, but have no source for

>> DB23 connectors and do not wish to hack it up.

>

> The box you have has a DB23 for RGB input...

> Is it male (pins) or female (sockets)?

> Would you try it if you had a custom cable?


I would try it.  It has a DB23F on the Amiga end and a sub-DB15F on the 
other.  The unit gets its power from the Amiga video connector.


> I guess the more important end is where the monitor would

> normally plug in to the computer. I feel that custom cabling

> minimizing the end-user's need to hack/solder could make this

> a really hot item.


DB23 connectors (male or female) are generally really hard to come by.

-- 
Theodore (Alex) Evans | 2B v ~2B = ?