[Coco] Re: Re: Shell + 2.2a

[Charlie]

Well I made a Nitros9 boto disk, but I can't seem to get my B&B hard disk
control to work with it. I loaded bbfhdisk.dr and h0.dd but I can't access
/h0.

"John Donaldson" <jadonaldson at charter.net> wrote
in message news:40F2B071.6060906 at charter.net...
> Charlie,
>     Try downloading the files from http://www.nitros9.org/. There files
> for the COCO1/2,
> COCO3 with 6809 and COCO3 with 6309. Both of the COCO3 versiosn have
> SHell 2.2a
> already installed. You will need the DSKINI.exe file to transfer them
> from a DSK to a real coco3
> diskette.
>
>
> John Donaldson
>
>
> Charlie wrote:
>
> > What can I do to fix the problem? What files were merged? I know most
> > of  my OS9 system was put together many years ago, and I remember
> > replacing  many commands with ones from delphi.
> >
> > I don't know very much about OS9 but I would love to understand it
> > better.  Not to mention get everything working with Shell+2.2a :)
> >
> > Thanks.
> >
> > Charlie
> >
> >
> >
> > On Mon, 12 Jul 2004 10:15:06 -0700, Ray Watts
> > <rayanddoraleew at earthlink.net> wrote:
> >
> >>
> >>
> >> Charlie wrote:
> >>
> >>> This weekend I replaced Shell+2.1 with Shell+2.2a on my COCO3 OS9
> >>> LevII  system. I correctly did the IPATCH to SCF.MN and made a new
> >>> boot  disk.  When I boot the system to OS9 everything seems fine
> >>> and  Shell+2.2a seems  to be working.
> >>>
> >>> However, the 1st thing I tried to do gave me trouble. I get a not
> >>> enough  RAM error when I try to format a floppy disk. Switching back
> >>> to  Shell+2.1  everything works fine.
> >>>
> >>> Can anyone help me with this?
> >>>
> >>> Charlie
> >>>
> >> Isn't that the notorious case where files merged with Shell+2.1 was
> >> JUST  below 1024X8-512?  Then when you replaced 2.1 with a larger
> >> 2.2a you  went over the 8k limit.  Sure sounds like it.
> >>
> >>
> >
> >
> >
>
>
>
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>