[Coco] OS9 Files

[John Donaldson]

Robert,
   That is what I am using. BTW transfering ascii test files to/from OS9 
works great. It is only
when I try and copy a binary file from MSDOS to OS9 that I get the 
MODULE HEADER ERROR.
The version I am using is Ver 2.06 Dated July 13, 1995.

John Donaldson


Robert Gault wrote:


> John Donaldson wrote:

>

>> I found it and it does work except when I do a Ident on the file 

>> under NITROS9 it says teh CRC

>> is good but then gives an error that says the Module Header is BAD. 

>> If I attempt to run the program

>> it blows up. Could be the utility AR, I tried to copy over. I copied 

>> from MSDOS to a DSK. Don't

>> know if it makes a difference or not. I was able to successfully move 

>> a text file from NITROS9 to MSDOS. It could be the file was bad to 

>> begin with. I'll try others tonight.

>>

>> John Donaldson

>>

>>

>> Robert Gault wrote:

>>

>>> John Donaldson wrote:

>>>

>>>>  Which MSDOS utilit do I use to move OS9 files ont a formated OS9 

>>>> disk or DSK. I want to

>>>> start moving files off the CDROM that I got from Br. Jermery onto 

>>>> the emulator.

>>>>    I tried PORT.exe but it seem to only want to use a standard 

>>>> COCO3 Disk Format and not

>>>> OS9.

>>>>

>>>> John Donaldson

>>>>

>>>>

>>>>

>>> There is a program OS9.EXE which runs on a PC that does the job 

>>> nicely. If you can't find it on RTSI, let me know.

>>>

>>>

>>

>>

>>

>

> The program I referred to, OS9.EXE, runs on the PC not the Coco.

>

>